The Full History, Current Achievements & Future Plans Of Universal Electronics Are Stated Below

The  Past, Present & Future Of "UNIVERSAL ELECTRONICS TECHNOLOGY"

NOTE: There Is An "Investment  Opportunity Opened For Investors" At The End Of This Message; So Read To The End, Please.

Amateur In 1993 To Professional In 2023 And Beyond:

Going back into time, it is almost impossible for me to know exactly when I started to be curious and investigative into knowing how some things made out of technology functioned. Only God and my parents can tell how many Radio Sets, Tape Recorders, Torch Lights, Bicycle Head lamps, Digital Watches, Analogue Watches, etc; I have opened ( and reassembled successfully ) or dismantled ( and failed to reassemble ) in an attempt to see what is inside or how they were made before I turned 15 years ( in 1992 ). I MUST confess they are countless gadgets; and about 70% of them often go destroyed as I repeat the opening and reassembling processes until I can design some of the parts or components as substitutes before my curiosity is satisfied. Irrespective of complains and sometimes punishment from my parents or elderly siblings the gadgets belong, I continued out of my Technological desire, funny enough!

However, “Chance rewards its hardworking labourer” as they say is true. Things turned around at age 16 (in 1993) onwards; I became a very good repairer of almost every gadget that had fault and was brought to me, either within my home or our neighbours homes.Yet the first best and most significant event in my life happened when myself and my friends as school mates agreed to design toy planes ( Helicopters ) for crafts work in schools at the end of the terminal exams for marks to be awarded to us by our teachers as usually done in all Ghanaian schools.

My Wooden Toy Helicopter could fly or take off for few meters before falling off, but my mates own could not take off, though similar designs….what a joy!

Below are some of my historic landmark of events of interest, my present achievements and future plans in Technology.

Past Achievements:

(1) In 1993:

Wooden Helicopter ( Battery Powered ) successfully flew about 50 meters before falling to the ground due to in-balance as I did not know much about Gravitational Force at the age of 16 years as a Class 6 Pupil; this experiment happened at Babatokumah School Park.

(2) In 1998:

I successfully designed an FM Transmitter for transmission and reception of announcements and playing music; the transmission was clear across Kintampo Senior High School Campus, whiles I was a Second Year Science Student in the School. The ADARS FM Crew in Kintampo then threatened to arrest me and my Dormitory Members, as we were learning by experimenting, but the School rules stopped them from coming for us on campus. Just for the fact that we have not registered or have the right to operate on the airwaves.

(3) In 2000:

SEMI-CONDUCTOR MATERIALS (Diode) was made just after I completed Senior High School and went back to my parents at Babatokumah. Semi-Conductors design is the DEEPEST SECRETS in Electronics; which I successfully made without any Electronics Specialist guidance.

Present Achievements:

(1) RECTIFYING CIRCUITS:

(i) Building of Charging Systems & Chargers

(ii) Making of Flash Lights

(2) ROBOTS:

(i) Controlling of House / Farm / Work Place Equipment whiles away from the place.

(ii) Providing Security in your absence or presence (iii) Protection of automobiles / Motorcycles / etc, with Antitheft Controls

(3) ARTIFICIAL INTELLIGENCE DRIVER (A.I.D) :

(i) Auto switching of Power Systems or Power Supply ( From Mains Supply To Generator & Vice Versa During Power Outages )

(ii) Ringing of Alarms / Door Bells / Taking Pictures, if someone enters a restricted area within your premises.

(iii) Driving or Controlling of Cars on land / Ships On Water & Beneath Water / Aircrafts & Spacecrafts.

MY SET TARGETS ( Future Plans ):

(1) ELECTRIC WATER PUMPS

(2) ELECTRIC CARS

(3) AIRCRAFTS ( Drones & Aircrafts Powered By Electricity )

(4) RADIO TECHNOLOGY ( Radio Transmitters Making & Communication Satellites Launching )

TECHNOLOGY – Production Industry ( 2023 And Beyond )

PART 1: Electronic Components

(1) Resistors - (Control flow of Current)

(2) Capacitors - (Store Electric Charge) 

(3) Diodes - (Allow Flow Of Current In Only One Direction)

(4) Inductors - (Store Electromagnetic Energy)

**(5) Transistors - ( Do Logical Switching / Amplifying )

**(6) L.E.D ( Light Emitting Diodes) - (Convert Electric Energy To Visible Light Colours)

I have the capability, knowledge and practical experience in the production of the first four (4) out of the six (6) electronic components listed above. I produced and tested them in circuits that really worked exactly as substitutes. The last two (2) components with double asterisks are those though I have knowledge on how they are made / work; I need some high tech equipment to enable me produce them. As they need dark and transparent plastic covering respectively to work well. The first three (3) I listed above, Resistors, Capacitors and Diodes are the most commonly used components in both the Design and Repair Electronics Industry. If we go into the production of these commonly used Electronic Components by investing to acquire the requisite machinery to ensure high accuracy and durability to gain consumers confidence with a little advertisement on the media; we can make Millions of Dollars just within Ghana; and much higher benefits if exported to other African countries and beyond. My investigations from the sellers and retailers of these components proved that they import all from outside Ghana / Africa. Meaning there is no such industry in Ghana or within the West African Sub-region producing them. So it could be a very lucrative venture to undertake. 

PART 2: ELECTRONIC GADGETS DESIGNS / MAKING: Through Research, Practice and Personal Efforts; I have been able to know how to put Electronic Components together to build a lot of electronic gadgets. Some are already existing ones, whiles others are my personal innovations / inventions. Below are some of the successfully built and tested gadgets to my credit and their uses:

(1) RECTIFYING CIRCUITS USES:

(i) Chargers; RECTIFYING CIRCUITS have enabled me to design and make chargers / adapters for a lot of Electronic Gadgets such as Mobile Phones, Laptop Computers, Radio Sets, Decoders, etc.

(ii) Making of Flash Lights; RECTIFYING CIRCUITS idea made it possible for me to make Rechargeable Lamps / Torch Lights for domestic uses.

(2) TRANSFORMERS: 

TRANSFORMERS are usually made up of Bulky or Heavy Metals from iron or alloys of iron and other metals with very long wire windings around them. They are very complex to produce, however, I have successfully observed some Electronics Principles and realized it is possible to produce TRANSFORMERS without Metals or Wire Windings; especially STEP-DOWN Transformers ( Reducing High Voltage To Low Voltage for suitable purposes ). Hence, I designed and tested Step-Down Transformers in a lot of gadgets that are performing very well. The advantages of transformers without wire windings or metals are many, to mention a few are cheap cost of production, very light to convey, etc.

NOTE: This idea could also be used to make Step-Up Transformers, if a deeper research is conducted into it. This could be very good as it will replace the Obsolete Heavy and very expensive transformers used in the Transmission of Electricity across all nations in the world.

(3) ROBOTS:

This is one of my Masterpieces in Electronics, as its uses are many and very accurate. It is coupled with the use of Network ( Telecom, Bluetooth, etc ) or Radio Waves to carry out Commands or Instructions at a near / far distance or even in space. Below are some few uses of the Robots Designed:

(i) Controlling of House / Farm / Work Place Equipment whiles away from the place.

(ii) Providing Security in your absence or presence

(iii) Protection of automobiles / Motorcycles / etc, with Antitheft Controls

(4) ARTIFICIAL INTELLIGENCE DRIVER ( A.I.D. ) : The A.I.D is another Masterpieces in Electronics I have achieved. Its uses are many and very accurate as well. It looks or operates much the same way as the Robot; but differs in at least three (3) ways:(i) It does NOT need Network to operate (Unless to be operated by a Robot) (ii) It uses Settings or Environmental Changes / influences to operate (iii) Unlike the Robot, A.I.D may or may not be controlled by a person; but can act intellectually in accordance with setup rules assigned to it. Below are some few uses of My A.I.D:

(i) Auto switching of Power Systems or Power Supply (From Mains Supply To Generator & Vice Versa During Power Outages)

(ii) Ringing of Alarms / Door Bells / Taking Pictures, if someone enters a restricted area within your premises.

(iii) Driving or Controlling of Cars on land / Ships On Water & Beneath Water / Aircrafts & Spacecrafts.

The above are some of the areas I hope to get Sponsorship, Grant, Partnership, Loan or any form of MATERIAL /  FINANCIAL support to obtain High-Tech Equipment to enable me do it better and faster to facilitate benefits that the dividends will be shared as may be agreed upon during our agreement.

Researcher: Sir Domayelle Clement

Mobile Number: 0546495292

Email: [email protected]

Thanks For Visiting Universal Electronics Website